# generated by Slic3r 1.2.9 on Sat Jan 11 10:51:42 2020
bed_shape = 0x0,180x0,180x180,0x180
before_layer_gcode = 
end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature\nG1 X0 Y180 ; home X axis and move Y axis to front\nM84     ; disable motors
extruder_offset = 0x0
gcode_flavor = reprap
layer_gcode = M117 Layer [layer_num]...
nozzle_diameter = 0.4
octoprint_apikey = 
octoprint_host = 
pressure_advance = 0
retract_before_travel = 2
retract_layer_change = 1
retract_length = 0.8
retract_length_toolchange = 10
retract_lift = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 30
start_gcode = M140 S[first_layer_bed_temperature] ; set bed temp and continue\nM104 S[temperature] ; set extruder temperature and continue\nM117 [filament_used] ; display filament_used used\nG28 ; home all axes\n\nM109 S[temperature]; wait for extruder temperature to be reached\nM190 S[first_layer_bed_temperature]; wait for bed temperature to be reached\nG29 ; bed level\n\nG1 X0 Y0 Z2 F5000 ; move 0,0,2\nG1 E15 F300 ;extrude anchor\nG1 X5 Y5 Z0 F500 ; move away from anchor
toolchange_gcode = 
use_firmware_retraction = 0
use_relative_e_distances = 0
use_volumetric_e = 0
vibration_limit = 0
wipe = 0
z_offset = 0