28 lines
1.1 KiB
INI
28 lines
1.1 KiB
INI
# generated by Slic3r 1.2.9 on Sun Jan 12 11:05:41 2020
|
|
bed_shape = 0x0,180x0,180x180,0x180
|
|
before_layer_gcode =
|
|
end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature\nG1 X0 Y180 ; home X axis and move Y axis to front\nM84 ; disable motors
|
|
extruder_offset = 0x0
|
|
gcode_flavor = reprap
|
|
layer_gcode = M117 Layer [layer_num]...
|
|
nozzle_diameter = 0.4
|
|
octoprint_apikey =
|
|
octoprint_host =
|
|
pressure_advance = 0
|
|
retract_before_travel = 2
|
|
retract_layer_change = 1
|
|
retract_length = 0.8
|
|
retract_length_toolchange = 10
|
|
retract_lift = 0
|
|
retract_restart_extra = 0
|
|
retract_restart_extra_toolchange = 0
|
|
retract_speed = 30
|
|
start_gcode = M140 S[first_layer_bed_temperature] ; set bed temp and continue\nM109 S[temperature]; wait for extruder temperature to be reached\nM190 S[first_layer_bed_temperature]; wait for bed temperature to be reached\nG28 ; home all axes\nG1 X0 Y0 Z2 F5000 ; move 0,0,2\nG1 E15 F300 ;extrude anchor\nG1 X5 Y5 Z0 F500 ; move away from anchor
|
|
toolchange_gcode =
|
|
use_firmware_retraction = 0
|
|
use_relative_e_distances = 0
|
|
use_volumetric_e = 0
|
|
vibration_limit = 0
|
|
wipe = 0
|
|
z_offset = 0
|