new
This commit is contained in:
James
parent
b91c387519
commit
c7602f0eb9
774
ESPBMS.ino
774
ESPBMS.ino
@ -1,651 +1,123 @@
|
||||
|
||||
// ==== CONFIGURATION ====
|
||||
// BMS
|
||||
#define BMS_MAX_CELLS 15 // defines size of data types
|
||||
#define BMS_POLLING_INTERVAL 10*60*1000 // data output interval (shorter = connect more often = more battery consumption from BMS) in ms
|
||||
|
||||
// BLE
|
||||
#define BLE_NAME "BMS 1.1" // name of BMS
|
||||
|
||||
#define BLE_SCAN_DURATION 1 // duration of scan in seconds
|
||||
#define BLE_REQUEST_DELAY 500 // package request delay after connecting - make this large enough to have the connection established in ms
|
||||
#define BLE_TIMEOUT 600*1000 // timeout of scan + gathering packets (too short will fail collecting all packets) in ms
|
||||
|
||||
#define BLE_CALLBACK_DEBUG true // send debug messages via MQTT & serial in callbacks (handy for finding your BMS address, name, RSSI, etc)
|
||||
|
||||
// ==== MAIN CODE ====
|
||||
#include "datatypes.h" // for brevity the BMS stuff is in this file
|
||||
#include <BLEDevice.h> // for BLE
|
||||
|
||||
#include <driver/adc.h> // to read ESP battery voltage
|
||||
#include <rom/rtc.h> // to get reset reason
|
||||
|
||||
|
||||
// Init BMS
|
||||
static BLEUUID serviceUUID("0000ff00-0000-1000-8000-00805f9b34fb"); //xiaoxiang bms service
|
||||
static BLEUUID charUUID_rx("0000ff01-0000-1000-8000-00805f9b34fb"); //xiaoxiang bms rx id
|
||||
static BLEUUID charUUID_tx("0000ff02-0000-1000-8000-00805f9b34fb"); //xiaoxiang bms tx id
|
||||
|
||||
const byte cBasicInfo = 3; //datablock 3=basic info
|
||||
const byte cCellInfo = 4; //datablock 4=individual cell info
|
||||
packBasicInfoStruct packBasicInfo;
|
||||
packCellInfoStruct packCellInfo;
|
||||
unsigned long bms_last_update_time=0;
|
||||
bool bms_status;
|
||||
#define BLE_PACKETSRECEIVED_BEFORE_STANDBY 0b11 // packets to gather before disconnecting
|
||||
|
||||
// Other stuff
|
||||
float battery_voltage=0; // internal battery voltage
|
||||
String debug_log_string="";
|
||||
hw_timer_t * wd_timer = NULL;
|
||||
|
||||
void debug(String s){
|
||||
Serial.println(s);
|
||||
}
|
||||
|
||||
void setup(){
|
||||
Serial.begin(115200);
|
||||
}
|
||||
|
||||
|
||||
// === Main stuff ====
|
||||
void loop(){
|
||||
bleGatherPackets();
|
||||
}
|
||||
|
||||
BLEScan* pBLEScan = nullptr;
|
||||
BLEClient* pClient = nullptr;
|
||||
BLEAdvertisedDevice* pRemoteDevice = nullptr;
|
||||
BLERemoteService* pRemoteService = nullptr;
|
||||
BLERemoteCharacteristic* pRemoteCharacteristic_rx = nullptr;
|
||||
BLERemoteCharacteristic* pRemoteCharacteristic_tx = nullptr;
|
||||
|
||||
boolean doScan = false; // becomes true when BLE is initialized and scanning is allowed
|
||||
boolean doConnect = false; // becomes true when correct ID is found during scanning
|
||||
|
||||
boolean ble_client_connected = false; // true when fully connected
|
||||
|
||||
unsigned int ble_packets_requested = 0b00; // keeps track of requested packets
|
||||
unsigned int ble_packets_received = 0b00; // keeps track of received packets
|
||||
|
||||
void MyEndOfScanCallback(BLEScanResults pBLEScanResult){
|
||||
bms_status=false; // BMS not found
|
||||
|
||||
if(BLE_CALLBACK_DEBUG){
|
||||
debug("BLE: scan finished");
|
||||
Serial.println("Scan finished.");
|
||||
}
|
||||
}
|
||||
|
||||
class MyAdvertisedDeviceCallbacks : public BLEAdvertisedDeviceCallbacks{
|
||||
// called for each advertising BLE server
|
||||
|
||||
void onResult(BLEAdvertisedDevice advertisedDevice){
|
||||
// found a device
|
||||
|
||||
|
||||
if(BLE_CALLBACK_DEBUG){
|
||||
debug(
|
||||
String("BLE: found ") +
|
||||
String(advertisedDevice.getName().c_str()) +
|
||||
String(" with address ") +
|
||||
String(advertisedDevice.getAddress().toString().c_str()) +
|
||||
String(" and RSSI ") +
|
||||
String(advertisedDevice.getRSSI())
|
||||
);
|
||||
|
||||
Serial.print("BLE: found ");
|
||||
Serial.println(advertisedDevice.toString().c_str());
|
||||
}
|
||||
|
||||
// Check if device is advertising the specific service UUID
|
||||
if (!advertisedDevice.isAdvertisingService(serviceUUID)) {
|
||||
debug("Device does not advertise the specified service UUID.");
|
||||
return;
|
||||
}
|
||||
|
||||
if(BLE_CALLBACK_DEBUG){
|
||||
debug("BLE: target device found");
|
||||
}
|
||||
|
||||
pBLEScan->stop();
|
||||
|
||||
// delete old remote device, create new one
|
||||
if(pRemoteDevice != nullptr){
|
||||
delete pRemoteDevice;
|
||||
}
|
||||
pRemoteDevice = new BLEAdvertisedDevice(advertisedDevice);
|
||||
|
||||
doConnect = true;
|
||||
}
|
||||
};
|
||||
|
||||
class MyClientCallback : public BLEClientCallbacks{
|
||||
// called on connect/disconnect
|
||||
void onConnect(BLEClient* pclient){
|
||||
|
||||
if(BLE_CALLBACK_DEBUG){
|
||||
debug(String("BLE: connecting to ") + String(pclient->getPeerAddress().toString().c_str()));
|
||||
}
|
||||
}
|
||||
|
||||
void onDisconnect(BLEClient* pclient){
|
||||
ble_client_connected = false;
|
||||
doConnect = false;
|
||||
|
||||
if(BLE_CALLBACK_DEBUG){
|
||||
debug(String("BLE: disconnected from ") + String(pclient->getPeerAddress().toString().c_str()));
|
||||
}
|
||||
|
||||
}
|
||||
};
|
||||
|
||||
static void MyNotifyCallback(BLERemoteCharacteristic *pBLERemoteCharacteristic, uint8_t *pData, size_t length, bool isNotify){
|
||||
//this is called when BLE server sents data via notification
|
||||
//hexDump((char*)pData, length);
|
||||
if(!bleCollectPacket((char *)pData, length)){
|
||||
debug("ERROR: packet could not be collected.");
|
||||
}
|
||||
}
|
||||
|
||||
void handleBLE(){
|
||||
static unsigned long prev_millis_standby = 0;
|
||||
|
||||
prev_millis_standby = millis();
|
||||
|
||||
while(true){ // loop until we hit a timeout or gathered all packets
|
||||
|
||||
if((ble_packets_received == BLE_PACKETSRECEIVED_BEFORE_STANDBY) || (millis()>prev_millis_standby+BLE_TIMEOUT)){
|
||||
if(ble_packets_received == BLE_PACKETSRECEIVED_BEFORE_STANDBY){
|
||||
debug("BLE: all packets received");
|
||||
bms_status=true; // BMS was connected, data up-to-date
|
||||
printBasicInfo();
|
||||
printCellInfo();
|
||||
}else{
|
||||
debug("BLE: connection timeout");
|
||||
bms_status=false; // BMS not (fully) connected
|
||||
}
|
||||
|
||||
break; // we're done with BLE, exit while loop
|
||||
}
|
||||
else if (doConnect){
|
||||
|
||||
// found the desired BLE server, now connect to it
|
||||
if (connectToServer()){
|
||||
ble_client_connected = true;
|
||||
ble_packets_received=0;
|
||||
ble_packets_requested=0;
|
||||
|
||||
}else{
|
||||
ble_client_connected = false;
|
||||
debug("BLE: failed to connect");
|
||||
}
|
||||
|
||||
doConnect = false;
|
||||
}
|
||||
|
||||
if (ble_client_connected){
|
||||
debug("BLE: requesting packet 0b01");
|
||||
delay(5000);
|
||||
bmsRequestBasicInfo();
|
||||
debug("BLE: requesting packet 0b10");
|
||||
delay(5000);
|
||||
bmsRequestCellInfo();
|
||||
}else if ((!doConnect)&&(doScan)){
|
||||
// we are not connected, so we can scan for devices
|
||||
debug("BLE: not connected, starting scan");
|
||||
Serial.print("BLE is not connected, starting scan");
|
||||
|
||||
// Disconnect client
|
||||
if((pClient != nullptr)&&(pClient->isConnected())){
|
||||
pClient->disconnect();
|
||||
}
|
||||
|
||||
// stop scan (if running) and start a new one
|
||||
pBLEScan->setActiveScan(true);
|
||||
pBLEScan->setInterval(1 << 8); // 160 ms
|
||||
pBLEScan->setWindow(1 << 7); // 80 ms
|
||||
pBLEScan->start(BLE_SCAN_DURATION, MyEndOfScanCallback, false); // non-blocking, use a callback
|
||||
|
||||
doScan=false;
|
||||
|
||||
debug("BLE: scan started");
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
void bleGatherPackets(){
|
||||
bleStart();
|
||||
handleBLE();
|
||||
blePause();
|
||||
BLEDevice::deinit(false);
|
||||
}
|
||||
|
||||
void bleStart(){
|
||||
Serial.print("Starting BLE... ");
|
||||
|
||||
BLEDevice::init("");
|
||||
//esp_bt_controller_mem_release(ESP_BT_MODE_CLASSIC_BT); // release some unused memory
|
||||
|
||||
// Retrieve a BLE client
|
||||
pClient = BLEDevice::createClient();
|
||||
pClient->setClientCallbacks(new MyClientCallback());
|
||||
|
||||
// Retrieve a BLE scanner
|
||||
pBLEScan = BLEDevice::getScan();
|
||||
pBLEScan->setAdvertisedDeviceCallbacks(new MyAdvertisedDeviceCallbacks());
|
||||
|
||||
bleContinue();
|
||||
Serial.println("done");
|
||||
}
|
||||
|
||||
void blePause(){
|
||||
// stop scanning and disconnect from all devices
|
||||
doScan=false;
|
||||
|
||||
// Disconnect client
|
||||
if((pClient != nullptr)&&(pClient->isConnected())){
|
||||
pClient->disconnect();
|
||||
}
|
||||
|
||||
delay(50);
|
||||
|
||||
pBLEScan->stop();
|
||||
|
||||
ble_client_connected=false;
|
||||
doConnect=false;
|
||||
ble_packets_received=0;
|
||||
ble_packets_requested=0;
|
||||
|
||||
}
|
||||
|
||||
void bleContinue(){
|
||||
// Prepare for scanning
|
||||
ble_client_connected=false;
|
||||
doConnect=false;
|
||||
ble_packets_received=0;
|
||||
|
||||
doScan=true; // start scanning for new devices
|
||||
}
|
||||
|
||||
bool connectToServer(){
|
||||
if(pRemoteDevice==nullptr){
|
||||
Serial.println("Invalid remote device, can't connect");
|
||||
return false;
|
||||
}
|
||||
|
||||
// Disconnect client
|
||||
if((pClient != nullptr)&&(pClient->isConnected())){
|
||||
pClient->disconnect();
|
||||
}
|
||||
|
||||
Serial.print("Forming a connection to ");
|
||||
Serial.println(pRemoteDevice->getAddress().toString().c_str());
|
||||
|
||||
delay(100);
|
||||
|
||||
// Connect to the remote BLE Server.
|
||||
pClient->connect(pRemoteDevice);
|
||||
if(!(pClient->isConnected())){
|
||||
debug(String("BLE: failed to connect"));
|
||||
Serial.println("Failed to connect to server");
|
||||
pClient->disconnect();
|
||||
return false;
|
||||
}
|
||||
|
||||
Serial.println(" - Connected to server");
|
||||
|
||||
|
||||
// Get remote service
|
||||
pRemoteService = pClient->getService(serviceUUID);
|
||||
if (pRemoteService == nullptr){
|
||||
debug(String("BLE: failed to find service UUID"));
|
||||
Serial.print("Failed to find our service UUID: ");
|
||||
Serial.println(serviceUUID.toString().c_str());
|
||||
pClient->disconnect();
|
||||
return false;
|
||||
}
|
||||
Serial.println(" - Found our service");
|
||||
|
||||
|
||||
// Get BMS receive characteristic
|
||||
pRemoteCharacteristic_rx = pRemoteService->getCharacteristic(charUUID_rx);
|
||||
if (pRemoteCharacteristic_rx == nullptr){
|
||||
debug(String("BLE: failed to find RX UUID"));
|
||||
Serial.print("Failed to find rx UUID: ");
|
||||
Serial.println(charUUID_rx.toString().c_str());
|
||||
pClient->disconnect();
|
||||
return false;
|
||||
}
|
||||
Serial.println(" - Found RX characteristic");
|
||||
|
||||
|
||||
// Register callback for remote characteristic (receive channel)
|
||||
if (pRemoteCharacteristic_rx->canNotify()){
|
||||
pRemoteCharacteristic_rx->registerForNotify(MyNotifyCallback);
|
||||
}else{
|
||||
debug(String("BLE: failed to register notification of remote characteristic"));
|
||||
Serial.println("Failed to register notification of remote characteristic");
|
||||
pClient->disconnect();
|
||||
return false;
|
||||
}
|
||||
Serial.println(" - Registered remote characteristic for notification");
|
||||
|
||||
|
||||
// Get BMS transmit characteristic
|
||||
pRemoteCharacteristic_tx = pRemoteService->getCharacteristic(charUUID_tx);
|
||||
if (pRemoteCharacteristic_tx == nullptr){
|
||||
debug(String("BLE: failed to find TX UUID"));
|
||||
Serial.print("Failed to find tx UUID: ");
|
||||
Serial.println(charUUID_tx.toString().c_str());
|
||||
pClient->disconnect();
|
||||
return false;
|
||||
}
|
||||
Serial.println(" - Found TX characteristic");
|
||||
|
||||
|
||||
// Check whether tx is writeable
|
||||
if (!(pRemoteCharacteristic_tx->canWriteNoResponse())){
|
||||
debug(String("BLE: failed TX remote characteristic is not writable"));
|
||||
Serial.println("Failed TX remote characteristic is not writable");
|
||||
pClient->disconnect();
|
||||
return false;
|
||||
}
|
||||
Serial.println(" - TX is writable");
|
||||
|
||||
|
||||
delay(BLE_REQUEST_DELAY); // wait, otherwise writeValue doesn't work for some reason
|
||||
// to do: fix this ugly hack
|
||||
|
||||
debug(String("BLE: connected"));
|
||||
|
||||
return true;
|
||||
}
|
||||
|
||||
bool sendCommand(uint8_t *data, uint32_t dataLen){
|
||||
if((pClient!=nullptr)&&(pClient->isConnected())){
|
||||
pRemoteCharacteristic_tx->writeValue(data, dataLen, false);
|
||||
return true;
|
||||
}else{
|
||||
return false;
|
||||
}
|
||||
}
|
||||
|
||||
bool isPacketValid(byte *packet) //check if packet is valid
|
||||
{
|
||||
if (packet == nullptr){
|
||||
return false;
|
||||
}
|
||||
|
||||
bmsPacketHeaderStruct *pHeader = (bmsPacketHeaderStruct *)packet;
|
||||
int checksumPos = pHeader->dataLen + 2; // status + data len + data
|
||||
|
||||
int offset = 2; // header 0xDD and command type are not in data length
|
||||
|
||||
if (packet[0] != 0xDD){
|
||||
// start bit missing
|
||||
return false;
|
||||
}
|
||||
|
||||
if (packet[offset + checksumPos + 2] != 0x77){
|
||||
// stop bit missing
|
||||
return false;
|
||||
}
|
||||
|
||||
byte checksum = 0;
|
||||
for (int i = 0; i < checksumPos; i++){
|
||||
checksum += packet[offset + i];
|
||||
}
|
||||
checksum = ((checksum ^ 0xFF) + 1) & 0xFF;
|
||||
|
||||
if (checksum != packet[offset + checksumPos + 1]){
|
||||
return false;
|
||||
}
|
||||
|
||||
return true;
|
||||
}
|
||||
|
||||
bool processBasicInfo(packBasicInfoStruct *output, byte *data, unsigned int dataLen)
|
||||
{
|
||||
// Expected data len
|
||||
if (dataLen != 0x1B)
|
||||
{
|
||||
Serial.printf("bad data len %d!\r\n",dataLen);
|
||||
//return false;
|
||||
}
|
||||
|
||||
output->Volts = ((uint32_t)two_ints_into16(data[0], data[1])) * 10; // Resolution 10 mV -> convert to milivolts eg 4895 > 48950mV
|
||||
output->Amps = ((int32_t)two_ints_into16(data[2], data[3])) * 10; // Resolution 10 mA -> convert to miliamps
|
||||
|
||||
output->Watts = output->Volts * output->Amps / 1000000; // W
|
||||
|
||||
output->CapacityRemainAh = ((uint16_t)two_ints_into16(data[4], data[5])) * 10;
|
||||
output->CapacityRemainPercent = ((uint8_t)data[19]);
|
||||
|
||||
output->Temp1 = (((uint16_t)two_ints_into16(data[23], data[24])) - 2731);
|
||||
output->Temp2 = (((uint16_t)two_ints_into16(data[25], data[26])) - 2731);
|
||||
output->BalanceCodeLow = (two_ints_into16(data[12], data[13]));
|
||||
output->BalanceCodeHigh = (two_ints_into16(data[14], data[15]));
|
||||
output->MosfetStatus = ((byte)data[20]);
|
||||
|
||||
printBasicInfo();
|
||||
|
||||
return true;
|
||||
}
|
||||
|
||||
bool processCellInfo(packCellInfoStruct *output, byte *data, unsigned int dataLen)
|
||||
{
|
||||
uint16_t _cellSum;
|
||||
uint16_t _cellMin = 5000;
|
||||
uint16_t _cellMax = 0;
|
||||
uint16_t _cellAvg;
|
||||
uint16_t _cellDiff;
|
||||
|
||||
output->NumOfCells = dataLen / 2; // data contains 2 bytes per cell
|
||||
|
||||
//go trough individual cells
|
||||
for (byte i = 0; i < dataLen / 2; i++)
|
||||
{
|
||||
output->CellVolt[i] = ((uint16_t)two_ints_into16(data[i * 2], data[i * 2 + 1])); // Resolution 1 mV
|
||||
_cellSum += output->CellVolt[i];
|
||||
if (output->CellVolt[i] > _cellMax)
|
||||
{
|
||||
_cellMax = output->CellVolt[i];
|
||||
}
|
||||
if (output->CellVolt[i] < _cellMin)
|
||||
{
|
||||
_cellMin = output->CellVolt[i];
|
||||
}
|
||||
}
|
||||
|
||||
output->CellMin = _cellMin;
|
||||
output->CellMax = _cellMax;
|
||||
output->CellDiff = _cellMax - _cellMin;
|
||||
output->CellAvg = _cellSum / output->NumOfCells;
|
||||
|
||||
printCellInfo();
|
||||
|
||||
return true;
|
||||
}
|
||||
|
||||
bool bmsProcessPacket(byte *packet)
|
||||
{
|
||||
bool isValid = isPacketValid(packet);
|
||||
|
||||
if (isValid != true)
|
||||
{
|
||||
Serial.println("Invalid packer received");
|
||||
return false;
|
||||
}
|
||||
|
||||
bmsPacketHeaderStruct *pHeader = (bmsPacketHeaderStruct *)packet;
|
||||
byte *data = packet + sizeof(bmsPacketHeaderStruct); // TODO Fix this ugly hack
|
||||
unsigned int dataLen = pHeader->dataLen;
|
||||
|
||||
bool result = false;
|
||||
|
||||
// find packet type (basic info or cell info)
|
||||
switch (pHeader->type)
|
||||
{
|
||||
case cBasicInfo:
|
||||
{
|
||||
// Process basic info
|
||||
result = processBasicInfo(&packBasicInfo, data, dataLen);
|
||||
if(result==true){
|
||||
ble_packets_received |= 0b01;
|
||||
bms_last_update_time=millis();
|
||||
}
|
||||
|
||||
break;
|
||||
}
|
||||
|
||||
case cCellInfo:
|
||||
{
|
||||
// Process cell info
|
||||
result = processCellInfo(&packCellInfo, data, dataLen);
|
||||
if(result==true){
|
||||
ble_packets_received |= 0b10;
|
||||
bms_last_update_time=millis();
|
||||
}
|
||||
break;
|
||||
}
|
||||
|
||||
default:
|
||||
result = false;
|
||||
Serial.printf("Unsupported packet type detected. Type: %d", pHeader->type);
|
||||
}
|
||||
|
||||
return result;
|
||||
}
|
||||
|
||||
bool bleCollectPacket(char *data, uint32_t dataSize) // reconstruct packet, called by notifyCallback function
|
||||
{
|
||||
static uint8_t packetstate = 0; //0 - empty, 1 - first half of packet received, 2- second half of packet received
|
||||
|
||||
// packet sizes:
|
||||
// (packet ID 03) = 4 (header) + 23 + 2*N_NTCs + 2 (checksum) + 1 (stop)
|
||||
// (packet ID 04) = 4 (header) + 2*NUM_CELLS + 2 (checksum) + 1 (stop)
|
||||
static uint8_t packetbuff[4 + 2*25 + 2 + 1] = {0x0}; // buffer size suitable for up to 25 cells
|
||||
|
||||
static uint32_t totalDataSize = 0;
|
||||
bool retVal = false;
|
||||
hexDump(data,dataSize);
|
||||
|
||||
if(totalDataSize + dataSize > sizeof(packetbuff)){
|
||||
Serial.printf("ERROR: datasize is overlength.");
|
||||
|
||||
debug(
|
||||
String("ERROR: datasize is overlength. ") +
|
||||
String("allocated=") +
|
||||
String(sizeof(packetbuff)) +
|
||||
String(", size=") +
|
||||
String(totalDataSize + dataSize)
|
||||
);
|
||||
|
||||
totalDataSize = 0;
|
||||
packetstate = 0;
|
||||
|
||||
retVal = false;
|
||||
}
|
||||
else if (data[0] == 0xdd && packetstate == 0) // probably got 1st half of packet
|
||||
{
|
||||
Serial.println("PKT1");
|
||||
packetstate = 1;
|
||||
for (uint8_t i = 0; i < dataSize; i++)
|
||||
{
|
||||
packetbuff[i] = data[i];
|
||||
}
|
||||
totalDataSize = dataSize;
|
||||
retVal = true;
|
||||
|
||||
if (data[dataSize - 1] == 0x77) {
|
||||
//its full packets
|
||||
packetstate = 2;
|
||||
}
|
||||
}
|
||||
else if (data[dataSize - 1] == 0x77 && packetstate == 1) //probably got 2nd half of the packet
|
||||
{
|
||||
Serial.println("PKT2");
|
||||
packetstate = 2;
|
||||
for (uint8_t i = 0; i < dataSize; i++)
|
||||
{
|
||||
packetbuff[i + totalDataSize] = data[i];
|
||||
}
|
||||
totalDataSize += dataSize;
|
||||
retVal = true;
|
||||
}
|
||||
|
||||
if (packetstate == 2) //got full packet
|
||||
{
|
||||
Serial.println("PKT3");
|
||||
uint8_t packet[totalDataSize];
|
||||
memcpy(packet, packetbuff, totalDataSize);
|
||||
|
||||
bmsProcessPacket(packet); //pass pointer to retrieved packet to processing function
|
||||
packetstate = 0;
|
||||
totalDataSize = 0;
|
||||
retVal = true;
|
||||
}
|
||||
return retVal;
|
||||
}
|
||||
|
||||
bool bmsRequestBasicInfo(){
|
||||
// header status command length data checksum footer
|
||||
// DD A5 03 00 FF FD 77
|
||||
uint8_t data[7] = {0xdd, 0xa5, cBasicInfo, 0x0, 0xff, 0xfd, 0x77};
|
||||
return sendCommand(data, sizeof(data));
|
||||
}
|
||||
|
||||
bool bmsRequestCellInfo(){
|
||||
// header status command length data checksum footer
|
||||
// DD A5 04 00 FF FC 77
|
||||
uint8_t data[7] = {0xdd, 0xa5, cCellInfo, 0x0, 0xff, 0xfc, 0x77};
|
||||
return sendCommand(data, sizeof(data));
|
||||
}
|
||||
|
||||
void printBasicInfo() //debug all data to uart
|
||||
{
|
||||
Serial.printf("Total voltage: %f\r\n", (float)packBasicInfo.Volts / 1000);
|
||||
Serial.printf("Amps: %f\r\n", (float)packBasicInfo.Amps / 1000);
|
||||
Serial.printf("CapacityRemainAh: %f\r\n", (float)packBasicInfo.CapacityRemainAh / 1000);
|
||||
Serial.printf("CapacityRemainPercent: %d\r\n", packBasicInfo.CapacityRemainPercent);
|
||||
Serial.printf("Temp1: %f\r\n", (float)packBasicInfo.Temp1 / 10);
|
||||
Serial.printf("Temp2: %f\r\n", (float)packBasicInfo.Temp2 / 10);
|
||||
Serial.printf("Balance Code Low: 0x%x\r\n", packBasicInfo.BalanceCodeLow);
|
||||
Serial.printf("Balance Code High: 0x%x\r\n", packBasicInfo.BalanceCodeHigh);
|
||||
Serial.printf("Mosfet Status: 0x%x\r\n", packBasicInfo.MosfetStatus);
|
||||
}
|
||||
|
||||
void printCellInfo() //debug all data to uart
|
||||
{
|
||||
Serial.printf("Number of cells: %u\r\n", packCellInfo.NumOfCells);
|
||||
for (byte i = 1; i <= packCellInfo.NumOfCells; i++)
|
||||
{
|
||||
Serial.printf("Cell no. %u", i);
|
||||
Serial.printf(" %f\r\n", (float)packCellInfo.CellVolt[i - 1] / 1000);
|
||||
}
|
||||
Serial.printf("Max cell volt: %f\r\n", (float)packCellInfo.CellMax / 1000);
|
||||
Serial.printf("Min cell volt: %f\r\n", (float)packCellInfo.CellMin / 1000);
|
||||
Serial.printf("Difference cell volt: %f\r\n", (float)packCellInfo.CellDiff / 1000);
|
||||
Serial.printf("Average cell volt: %f\r\n", (float)packCellInfo.CellAvg / 1000);
|
||||
Serial.println();
|
||||
}
|
||||
|
||||
void hexDump(const char *data, uint32_t dataSize) //debug function
|
||||
{
|
||||
Serial.println("HEX data:");
|
||||
|
||||
for (int i = 0; i < dataSize; i++)
|
||||
{
|
||||
Serial.printf("0x%x, ", data[i]);
|
||||
}
|
||||
Serial.println("");
|
||||
}
|
||||
|
||||
int16_t two_ints_into16(int highbyte, int lowbyte) // turns two bytes into a single long integer
|
||||
{
|
||||
int16_t result = (highbyte);
|
||||
result <<= 8; //Left shift 8 bits,
|
||||
result = (result | lowbyte); //OR operation, merge the two
|
||||
return result;
|
||||
}
|
||||
#include "BLEDevice.h"
|
||||
|
||||
static BLEUUID serviceUUID("0000ff00-0000-1000-8000-00805f9b34fb"); //xiaoxiang bms service
|
||||
static BLEUUID charUUID_rx("0000ff01-0000-1000-8000-00805f9b34fb"); //xiaoxiang bms rx id
|
||||
static BLEUUID charUUID_tx("0000ff02-0000-1000-8000-00805f9b34fb"); //xiaoxiang bms tx id
|
||||
|
||||
void setup() {
|
||||
Serial.begin(115200);
|
||||
BLEDevice::init(""); // Initialize BLE device
|
||||
}
|
||||
|
||||
void loop() {
|
||||
BLEScan* pBLEScan = BLEDevice::getScan(); // Create new scan
|
||||
pBLEScan->setActiveScan(true); // Active scan uses more power, but get results faster
|
||||
BLEScanResults foundDevices = pBLEScan->start(30); // Scan for 30 seconds
|
||||
|
||||
Serial.println("Scanning completed");
|
||||
Serial.println("Devices found: " + String(foundDevices.getCount()));
|
||||
|
||||
for (int i = 0; i < foundDevices.getCount(); i++) {
|
||||
BLEAdvertisedDevice advertisedDevice = foundDevices.getDevice(i);
|
||||
Serial.println("\nFound Device: " + String(advertisedDevice.toString().c_str()));
|
||||
|
||||
if(!advertisedDevice.isAdvertisingService(serviceUUID)) {
|
||||
Serial.println("Device does not advertise the specified service UUID.");
|
||||
continue;
|
||||
}
|
||||
|
||||
BLEClient* pClient = BLEDevice::createClient();
|
||||
Serial.println("Connecting to: " + String(advertisedDevice.getAddress().toString().c_str()));
|
||||
|
||||
if(!pClient->connect(&advertisedDevice)) {
|
||||
Serial.println("Failed to connect.");
|
||||
continue;
|
||||
}
|
||||
|
||||
// Get remote service
|
||||
BLERemoteService* pRemoteService = pClient->getService(serviceUUID);
|
||||
if (pRemoteService == nullptr){
|
||||
Serial.println(String("BLE: failed to find service UUID"));
|
||||
Serial.print("Failed to find our service UUID: ");
|
||||
Serial.println(serviceUUID.toString().c_str());
|
||||
pClient->disconnect();
|
||||
continue;
|
||||
}
|
||||
Serial.println(" - Found our service");
|
||||
|
||||
// Get BMS receive characteristic
|
||||
BLERemoteCharacteristic* pRemoteCharacteristic_rx = pRemoteService->getCharacteristic(charUUID_rx);
|
||||
if (pRemoteCharacteristic_rx == nullptr){
|
||||
Serial.println(String("BLE: failed to find RX UUID"));
|
||||
Serial.print("Failed to find rx UUID: ");
|
||||
Serial.println(charUUID_rx.toString().c_str());
|
||||
pClient->disconnect();
|
||||
continue;
|
||||
}
|
||||
Serial.println(" - Found RX characteristic");
|
||||
|
||||
// Register callback for remote characteristic (receive channel)
|
||||
if (pRemoteCharacteristic_rx->canNotify()){
|
||||
pRemoteCharacteristic_rx->registerForNotify(MyNotifyCallback);
|
||||
}else{
|
||||
Serial.println(String("BLE: failed to register notification of remote characteristic"));
|
||||
Serial.println("Failed to register notification of remote characteristic");
|
||||
pClient->disconnect();
|
||||
continue;
|
||||
}
|
||||
Serial.println(" - Registered remote characteristic for notification");
|
||||
|
||||
// Get BMS transmit characteristic
|
||||
BLERemoteCharacteristic* pRemoteCharacteristic_tx = pRemoteService->getCharacteristic(charUUID_tx);
|
||||
if (pRemoteCharacteristic_tx == nullptr){
|
||||
Serial.println(String("BLE: failed to find TX UUID"));
|
||||
Serial.print("Failed to find tx UUID: ");
|
||||
Serial.println(charUUID_tx.toString().c_str());
|
||||
pClient->disconnect();
|
||||
continue;
|
||||
}
|
||||
Serial.println(" - Found TX characteristic");
|
||||
|
||||
// Check whether tx is writeable
|
||||
if (!(pRemoteCharacteristic_tx->canWriteNoResponse())){
|
||||
Serial.println(String("BLE: failed TX remote characteristic is not writable"));
|
||||
Serial.println("Failed TX remote characteristic is not writable");
|
||||
pClient->disconnect();
|
||||
continue;
|
||||
}
|
||||
Serial.println(" - TX is writable");
|
||||
|
||||
// REQUEST BASIC INFO
|
||||
// header status command length data checksum footer
|
||||
// DD A5 03 00 FF FD 77
|
||||
uint8_t a_data[7] = {0xdd, 0xa5, 3, 0x0, 0xff, 0xfd, 0x77};
|
||||
pRemoteCharacteristic_tx->writeValue(a_data, sizeof(a_data), false);
|
||||
|
||||
// REQUEST CELL INFO
|
||||
// header status command length data checksum footer
|
||||
// DD A5 03 00 FF FD 77
|
||||
uint8_t b_data[7] = {0xdd, 0xa5, 4, 0x0, 0xff, 0xfc, 0x77};
|
||||
pRemoteCharacteristic_tx->writeValue(b_data, sizeof(b_data), false);
|
||||
|
||||
while(1){
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
static void MyNotifyCallback(BLERemoteCharacteristic *pBLERemoteCharacteristic, uint8_t *pData, size_t length, bool isNotify){
|
||||
hexDump((char*)pData, length);
|
||||
/*if(!bleCollectPacket((char *)pData, length)){
|
||||
Serial.println("ERROR: packet could not be collected.");
|
||||
}*/
|
||||
}
|
||||
|
||||
void hexDump(const char *data, uint32_t dataSize)
|
||||
{
|
||||
Serial.println("HEX data:");
|
||||
|
||||
for (int i = 0; i < dataSize; i++)
|
||||
{
|
||||
Serial.printf("0x%x, ", data[i]);
|
||||
}
|
||||
Serial.println("");
|
||||
}
|
||||
|
||||
592
old/ESPBMS.ino
Normal file
592
old/ESPBMS.ino
Normal file
@ -0,0 +1,592 @@
|
||||
|
||||
// ==== CONFIGURATION ====
|
||||
// BMS
|
||||
#define BMS_MAX_CELLS 15 // defines size of data types
|
||||
#define BMS_POLLING_INTERVAL 10*60*1000 // data output interval (shorter = connect more often = more battery consumption from BMS) in ms
|
||||
|
||||
// BLE
|
||||
#define BLE_SCAN_DURATION 1 // duration of scan in seconds
|
||||
#define BLE_REQUEST_DELAY 500 // package request delay after connecting - make this large enough to have the connection established in ms
|
||||
#define BLE_TIMEOUT 600*1000 // timeout of scan + gathering packets (too short will fail collecting all packets) in ms
|
||||
|
||||
#define BLE_CALLBACK_DEBUG true // send debug messages via MQTT & serial in callbacks (handy for finding your BMS address, name, RSSI, etc)
|
||||
|
||||
// ==== MAIN CODE ====
|
||||
#include "datatypes.h" // for brevity the BMS stuff is in this file
|
||||
#include <BLEDevice.h> // for BLE
|
||||
|
||||
#include <driver/adc.h> // to read ESP battery voltage
|
||||
#include <rom/rtc.h> // to get reset reason
|
||||
|
||||
|
||||
// Init BMS
|
||||
static BLEUUID serviceUUID("0000ff00-0000-1000-8000-00805f9b34fb"); //xiaoxiang bms service
|
||||
static BLEUUID charUUID_rx("0000ff01-0000-1000-8000-00805f9b34fb"); //xiaoxiang bms rx id
|
||||
static BLEUUID charUUID_tx("0000ff02-0000-1000-8000-00805f9b34fb"); //xiaoxiang bms tx id
|
||||
|
||||
const byte cBasicInfo = 3; //datablock 3=basic info
|
||||
const byte cCellInfo = 4; //datablock 4=individual cell info
|
||||
packBasicInfoStruct packBasicInfo;
|
||||
packCellInfoStruct packCellInfo;
|
||||
unsigned long bms_last_update_time=0;
|
||||
bool bms_status;
|
||||
#define BLE_PACKETSRECEIVED_BEFORE_STANDBY 0b11 // packets to gather before disconnecting
|
||||
|
||||
// Other stuff
|
||||
float battery_voltage=0; // internal battery voltage
|
||||
String debug_log_string="";
|
||||
hw_timer_t * wd_timer = NULL;
|
||||
|
||||
void debug(String s){
|
||||
Serial.println(s);
|
||||
}
|
||||
|
||||
void setup(){
|
||||
Serial.begin(115200);
|
||||
}
|
||||
|
||||
|
||||
// === Main stuff ====
|
||||
void loop(){
|
||||
bleGatherPackets();
|
||||
}
|
||||
|
||||
BLEScan* pBLEScan = nullptr;
|
||||
BLEClient* pClient = nullptr;
|
||||
BLEAdvertisedDevice* pRemoteDevice = nullptr;
|
||||
BLERemoteService* pRemoteService = nullptr;
|
||||
BLERemoteCharacteristic* pRemoteCharacteristic_rx = nullptr;
|
||||
BLERemoteCharacteristic* pRemoteCharacteristic_tx = nullptr;
|
||||
|
||||
boolean doScan = false; // becomes true when BLE is initialized and scanning is allowed
|
||||
boolean doConnect = false; // becomes true when correct ID is found during scanning
|
||||
|
||||
boolean ble_client_connected = false; // true when fully connected
|
||||
|
||||
unsigned int ble_packets_requested = 0b00; // keeps track of requested packets
|
||||
unsigned int ble_packets_received = 0b00; // keeps track of received packets
|
||||
|
||||
void MyEndOfScanCallback(BLEScanResults pBLEScanResult){
|
||||
bms_status=false; // BMS not found
|
||||
|
||||
if(BLE_CALLBACK_DEBUG){
|
||||
debug("BLE: scan finished");
|
||||
Serial.println("Scan finished.");
|
||||
}
|
||||
}
|
||||
|
||||
class MyAdvertisedDeviceCallbacks : public BLEAdvertisedDeviceCallbacks{
|
||||
// called for each advertising BLE server
|
||||
|
||||
void onResult(BLEAdvertisedDevice advertisedDevice){
|
||||
// found a device
|
||||
|
||||
|
||||
if(BLE_CALLBACK_DEBUG){
|
||||
debug(
|
||||
String("BLE: found ") +
|
||||
String(advertisedDevice.getName().c_str()) +
|
||||
String(" with address ") +
|
||||
String(advertisedDevice.getAddress().toString().c_str()) +
|
||||
String(" and RSSI ") +
|
||||
String(advertisedDevice.getRSSI())
|
||||
);
|
||||
|
||||
Serial.print("BLE: found ");
|
||||
Serial.println(advertisedDevice.toString().c_str());
|
||||
}
|
||||
|
||||
// Check if device is advertising the specific service UUID
|
||||
if (!advertisedDevice.isAdvertisingService(serviceUUID)) {
|
||||
debug("Device does not advertise the specified service UUID.");
|
||||
return;
|
||||
}
|
||||
|
||||
if(BLE_CALLBACK_DEBUG){
|
||||
debug("BLE: target device found");
|
||||
}
|
||||
|
||||
pBLEScan->stop();
|
||||
|
||||
// delete old remote device, create new one
|
||||
if(pRemoteDevice != nullptr){
|
||||
delete pRemoteDevice;
|
||||
}
|
||||
pRemoteDevice = new BLEAdvertisedDevice(advertisedDevice);
|
||||
|
||||
doConnect = true;
|
||||
}
|
||||
};
|
||||
|
||||
class MyClientCallback : public BLEClientCallbacks{
|
||||
// called on connect/disconnect
|
||||
void onConnect(BLEClient* pclient){
|
||||
|
||||
if(BLE_CALLBACK_DEBUG){
|
||||
debug(String("BLE: connecting to ") + String(pclient->getPeerAddress().toString().c_str()));
|
||||
}
|
||||
}
|
||||
|
||||
void onDisconnect(BLEClient* pclient){
|
||||
ble_client_connected = false;
|
||||
doConnect = false;
|
||||
|
||||
if(BLE_CALLBACK_DEBUG){
|
||||
debug(String("BLE: disconnected from ") + String(pclient->getPeerAddress().toString().c_str()));
|
||||
}
|
||||
|
||||
}
|
||||
};
|
||||
|
||||
static void MyNotifyCallback(BLERemoteCharacteristic *pBLERemoteCharacteristic, uint8_t *pData, size_t length, bool isNotify){
|
||||
//this is called when BLE server sents data via notification
|
||||
//hexDump((char*)pData, length);
|
||||
if(!bleCollectPacket((char *)pData, length)){
|
||||
debug("ERROR: packet could not be collected.");
|
||||
}
|
||||
}
|
||||
|
||||
void handleBLE(){
|
||||
static unsigned long prev_millis_standby = 0;
|
||||
|
||||
prev_millis_standby = millis();
|
||||
|
||||
while(true){ // loop until we hit a timeout or gathered all packets
|
||||
|
||||
if((ble_packets_received == BLE_PACKETSRECEIVED_BEFORE_STANDBY) || (millis()>prev_millis_standby+BLE_TIMEOUT)){
|
||||
if(ble_packets_received == BLE_PACKETSRECEIVED_BEFORE_STANDBY){
|
||||
debug("BLE: all packets received");
|
||||
bms_status=true; // BMS was connected, data up-to-date
|
||||
printBasicInfo();
|
||||
printCellInfo();
|
||||
}else{
|
||||
debug("BLE: connection timeout");
|
||||
bms_status=false; // BMS not (fully) connected
|
||||
}
|
||||
|
||||
break; // we're done with BLE, exit while loop
|
||||
}
|
||||
else if (doConnect){
|
||||
|
||||
// found the desired BLE server, now connect to it
|
||||
if (connectToServer()){
|
||||
ble_client_connected = true;
|
||||
ble_packets_received=0;
|
||||
ble_packets_requested=0;
|
||||
|
||||
}else{
|
||||
ble_client_connected = false;
|
||||
debug("BLE: failed to connect");
|
||||
}
|
||||
|
||||
doConnect = false;
|
||||
}
|
||||
|
||||
if (ble_client_connected){
|
||||
debug("BLE: requesting packet 0b01");
|
||||
delay(5000);
|
||||
bmsRequestBasicInfo();
|
||||
debug("BLE: requesting packet 0b10");
|
||||
delay(5000);
|
||||
bmsRequestCellInfo();
|
||||
}else if ((!doConnect)&&(doScan)){
|
||||
// we are not connected, so we can scan for devices
|
||||
debug("BLE: not connected, starting scan");
|
||||
Serial.print("BLE is not connected, starting scan");
|
||||
|
||||
// Disconnect client
|
||||
if((pClient != nullptr)&&(pClient->isConnected())){
|
||||
pClient->disconnect();
|
||||
}
|
||||
|
||||
// stop scan (if running) and start a new one
|
||||
pBLEScan->setActiveScan(true);
|
||||
pBLEScan->setInterval(1 << 8); // 160 ms
|
||||
pBLEScan->setWindow(1 << 7); // 80 ms
|
||||
pBLEScan->start(BLE_SCAN_DURATION, MyEndOfScanCallback, false); // non-blocking, use a callback
|
||||
|
||||
doScan=false;
|
||||
|
||||
debug("BLE: scan started");
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
void bleGatherPackets(){
|
||||
bleStart();
|
||||
handleBLE();
|
||||
blePause();
|
||||
BLEDevice::deinit(false);
|
||||
}
|
||||
|
||||
void bleStart(){
|
||||
Serial.print("Starting BLE... ");
|
||||
|
||||
BLEDevice::init("");
|
||||
//esp_bt_controller_mem_release(ESP_BT_MODE_CLASSIC_BT); // release some unused memory
|
||||
|
||||
// Retrieve a BLE client
|
||||
pClient = BLEDevice::createClient();
|
||||
pClient->setClientCallbacks(new MyClientCallback());
|
||||
|
||||
// Retrieve a BLE scanner
|
||||
pBLEScan = BLEDevice::getScan();
|
||||
pBLEScan->setAdvertisedDeviceCallbacks(new MyAdvertisedDeviceCallbacks());
|
||||
|
||||
bleContinue();
|
||||
Serial.println("done");
|
||||
}
|
||||
|
||||
void blePause(){
|
||||
// stop scanning and disconnect from all devices
|
||||
doScan=false;
|
||||
|
||||
// Disconnect client
|
||||
if((pClient != nullptr)&&(pClient->isConnected())){
|
||||
pClient->disconnect();
|
||||
}
|
||||
|
||||
delay(50);
|
||||
|
||||
pBLEScan->stop();
|
||||
|
||||
ble_client_connected=false;
|
||||
doConnect=false;
|
||||
ble_packets_received=0;
|
||||
ble_packets_requested=0;
|
||||
|
||||
}
|
||||
|
||||
void bleContinue(){
|
||||
// Prepare for scanning
|
||||
ble_client_connected=false;
|
||||
doConnect=false;
|
||||
ble_packets_received=0;
|
||||
|
||||
doScan=true; // start scanning for new devices
|
||||
}
|
||||
|
||||
bool connectToServer(){
|
||||
if(pRemoteDevice==nullptr){
|
||||
Serial.println("Invalid remote device, can't connect");
|
||||
return false;
|
||||
}
|
||||
|
||||
// Disconnect client
|
||||
if((pClient != nullptr)&&(pClient->isConnected())){
|
||||
pClient->disconnect();
|
||||
}
|
||||
|
||||
Serial.print("Forming a connection to ");
|
||||
Serial.println(pRemoteDevice->getAddress().toString().c_str());
|
||||
|
||||
delay(100);
|
||||
|
||||
// Connect to the remote BLE Server.
|
||||
pClient->connect(pRemoteDevice);
|
||||
if(!(pClient->isConnected())){
|
||||
debug(String("BLE: failed to connect"));
|
||||
Serial.println("Failed to connect to server");
|
||||
pClient->disconnect();
|
||||
return false;
|
||||
}
|
||||
|
||||
Serial.println(" - Connected to server");
|
||||
|
||||
|
||||
delay(BLE_REQUEST_DELAY); // wait, otherwise writeValue doesn't work for some reason
|
||||
// to do: fix this ugly hack
|
||||
|
||||
debug(String("BLE: connected"));
|
||||
|
||||
return true;
|
||||
}
|
||||
|
||||
bool sendCommand(uint8_t *data, uint32_t dataLen){
|
||||
if((pClient!=nullptr)&&(pClient->isConnected())){
|
||||
pRemoteCharacteristic_tx->writeValue(data, dataLen, false);
|
||||
return true;
|
||||
}else{
|
||||
return false;
|
||||
}
|
||||
}
|
||||
|
||||
bool isPacketValid(byte *packet) //check if packet is valid
|
||||
{
|
||||
if (packet == nullptr){
|
||||
return false;
|
||||
}
|
||||
|
||||
bmsPacketHeaderStruct *pHeader = (bmsPacketHeaderStruct *)packet;
|
||||
int checksumPos = pHeader->dataLen + 2; // status + data len + data
|
||||
|
||||
int offset = 2; // header 0xDD and command type are not in data length
|
||||
|
||||
if (packet[0] != 0xDD){
|
||||
// start bit missing
|
||||
return false;
|
||||
}
|
||||
|
||||
if (packet[offset + checksumPos + 2] != 0x77){
|
||||
// stop bit missing
|
||||
return false;
|
||||
}
|
||||
|
||||
byte checksum = 0;
|
||||
for (int i = 0; i < checksumPos; i++){
|
||||
checksum += packet[offset + i];
|
||||
}
|
||||
checksum = ((checksum ^ 0xFF) + 1) & 0xFF;
|
||||
|
||||
if (checksum != packet[offset + checksumPos + 1]){
|
||||
return false;
|
||||
}
|
||||
|
||||
return true;
|
||||
}
|
||||
|
||||
bool processBasicInfo(packBasicInfoStruct *output, byte *data, unsigned int dataLen)
|
||||
{
|
||||
// Expected data len
|
||||
if (dataLen != 0x1B)
|
||||
{
|
||||
//Serial.printf("bad data len %d!\r\n",dataLen);
|
||||
//return false;
|
||||
}
|
||||
|
||||
output->Volts = ((uint32_t)two_ints_into16(data[0], data[1])) * 10; // Resolution 10 mV -> convert to milivolts eg 4895 > 48950mV
|
||||
output->Amps = ((int32_t)two_ints_into16(data[2], data[3])) * 10; // Resolution 10 mA -> convert to miliamps
|
||||
|
||||
output->Watts = output->Volts * output->Amps / 1000000; // W
|
||||
|
||||
output->CapacityRemainAh = ((uint16_t)two_ints_into16(data[4], data[5])) * 10;
|
||||
output->CapacityRemainPercent = ((uint8_t)data[19]);
|
||||
|
||||
output->Temp1 = (((uint16_t)two_ints_into16(data[23], data[24])) - 2731);
|
||||
output->Temp2 = (((uint16_t)two_ints_into16(data[25], data[26])) - 2731);
|
||||
|
||||
output->BalanceCodeLow = (two_ints_into16(data[12], data[13]));
|
||||
output->BalanceCodeHigh = (two_ints_into16(data[14], data[15]));
|
||||
output->MosfetStatus = ((byte)data[20]);
|
||||
|
||||
printBasicInfo();
|
||||
|
||||
return true;
|
||||
}
|
||||
|
||||
bool processCellInfo(packCellInfoStruct *output, byte *data, unsigned int dataLen)
|
||||
{
|
||||
uint16_t _cellSum;
|
||||
uint16_t _cellMin = 5000;
|
||||
uint16_t _cellMax = 0;
|
||||
uint16_t _cellAvg;
|
||||
uint16_t _cellDiff;
|
||||
|
||||
output->NumOfCells = dataLen / 2; // data contains 2 bytes per cell
|
||||
|
||||
//go trough individual cells
|
||||
for (byte i = 0; i < dataLen / 2; i++)
|
||||
{
|
||||
output->CellVolt[i] = ((uint16_t)two_ints_into16(data[i * 2], data[i * 2 + 1])); // Resolution 1 mV
|
||||
_cellSum += output->CellVolt[i];
|
||||
if (output->CellVolt[i] > _cellMax)
|
||||
{
|
||||
_cellMax = output->CellVolt[i];
|
||||
}
|
||||
if (output->CellVolt[i] < _cellMin)
|
||||
{
|
||||
_cellMin = output->CellVolt[i];
|
||||
}
|
||||
}
|
||||
|
||||
output->CellMin = _cellMin;
|
||||
output->CellMax = _cellMax;
|
||||
output->CellDiff = _cellMax - _cellMin;
|
||||
output->CellAvg = _cellSum / output->NumOfCells;
|
||||
|
||||
printCellInfo();
|
||||
|
||||
return true;
|
||||
}
|
||||
|
||||
bool bmsProcessPacket(byte *packet)
|
||||
{
|
||||
bool isValid = isPacketValid(packet);
|
||||
|
||||
if (isValid != true)
|
||||
{
|
||||
Serial.println("Invalid packer received");
|
||||
return false;
|
||||
}
|
||||
|
||||
bmsPacketHeaderStruct *pHeader = (bmsPacketHeaderStruct *)packet;
|
||||
byte *data = packet + sizeof(bmsPacketHeaderStruct); // TODO Fix this ugly hack
|
||||
unsigned int dataLen = pHeader->dataLen;
|
||||
|
||||
bool result = false;
|
||||
|
||||
// find packet type (basic info or cell info)
|
||||
switch (pHeader->type)
|
||||
{
|
||||
case cBasicInfo:
|
||||
{
|
||||
// Process basic info
|
||||
result = processBasicInfo(&packBasicInfo, data, dataLen);
|
||||
if(result==true){
|
||||
ble_packets_received |= 0b01;
|
||||
bms_last_update_time=millis();
|
||||
}
|
||||
|
||||
break;
|
||||
}
|
||||
|
||||
case cCellInfo:
|
||||
{
|
||||
// Process cell info
|
||||
result = processCellInfo(&packCellInfo, data, dataLen);
|
||||
if(result==true){
|
||||
ble_packets_received |= 0b10;
|
||||
bms_last_update_time=millis();
|
||||
}
|
||||
break;
|
||||
}
|
||||
|
||||
default:
|
||||
result = false;
|
||||
Serial.printf("Unsupported packet type detected. Type: %d", pHeader->type);
|
||||
}
|
||||
|
||||
return result;
|
||||
}
|
||||
|
||||
bool bleCollectPacket(char *data, uint32_t dataSize) // reconstruct packet, called by notifyCallback function
|
||||
{
|
||||
static uint8_t packetstate = 0; //0 - empty, 1 - first half of packet received, 2- second half of packet received
|
||||
|
||||
// packet sizes:
|
||||
// (packet ID 03) = 4 (header) + 23 + 2*N_NTCs + 2 (checksum) + 1 (stop)
|
||||
// (packet ID 04) = 4 (header) + 2*NUM_CELLS + 2 (checksum) + 1 (stop)
|
||||
static uint8_t packetbuff[4 + 2*25 + 2 + 1] = {0x0}; // buffer size suitable for up to 25 cells
|
||||
|
||||
static uint32_t totalDataSize = 0;
|
||||
bool retVal = false;
|
||||
hexDump(data,dataSize);
|
||||
|
||||
if(totalDataSize + dataSize > sizeof(packetbuff)){
|
||||
Serial.printf("ERROR: datasize is overlength.");
|
||||
|
||||
debug(
|
||||
String("ERROR: datasize is overlength. ") +
|
||||
String("allocated=") +
|
||||
String(sizeof(packetbuff)) +
|
||||
String(", size=") +
|
||||
String(totalDataSize + dataSize)
|
||||
);
|
||||
|
||||
totalDataSize = 0;
|
||||
packetstate = 0;
|
||||
|
||||
retVal = false;
|
||||
}
|
||||
else if (data[0] == 0xdd && packetstate == 0) // probably got 1st half of packet
|
||||
{
|
||||
Serial.println("PKT1");
|
||||
packetstate = 1;
|
||||
for (uint8_t i = 0; i < dataSize; i++)
|
||||
{
|
||||
packetbuff[i] = data[i];
|
||||
}
|
||||
totalDataSize = dataSize;
|
||||
retVal = true;
|
||||
|
||||
if (data[dataSize - 1] == 0x77) {
|
||||
//its full packets
|
||||
packetstate = 2;
|
||||
}
|
||||
}
|
||||
else if (data[dataSize - 1] == 0x77 && packetstate == 1) //probably got 2nd half of the packet
|
||||
{
|
||||
Serial.println("PKT2");
|
||||
packetstate = 2;
|
||||
for (uint8_t i = 0; i < dataSize; i++)
|
||||
{
|
||||
packetbuff[i + totalDataSize] = data[i];
|
||||
}
|
||||
totalDataSize += dataSize;
|
||||
retVal = true;
|
||||
}
|
||||
|
||||
if (packetstate == 2) //got full packet
|
||||
{
|
||||
Serial.println("PKT3");
|
||||
uint8_t packet[totalDataSize];
|
||||
memcpy(packet, packetbuff, totalDataSize);
|
||||
|
||||
bmsProcessPacket(packet); //pass pointer to retrieved packet to processing function
|
||||
packetstate = 0;
|
||||
totalDataSize = 0;
|
||||
retVal = true;
|
||||
}
|
||||
return retVal;
|
||||
}
|
||||
|
||||
bool bmsRequestBasicInfo(){
|
||||
// header status command length data checksum footer
|
||||
// DD A5 03 00 FF FD 77
|
||||
uint8_t data[7] = {0xdd, 0xa5, cBasicInfo, 0x0, 0xff, 0xfd, 0x77};
|
||||
return sendCommand(data, sizeof(data));
|
||||
}
|
||||
|
||||
bool bmsRequestCellInfo(){
|
||||
// header status command length data checksum footer
|
||||
// DD A5 04 00 FF FC 77
|
||||
uint8_t data[7] = {0xdd, 0xa5, cCellInfo, 0x0, 0xff, 0xfc, 0x77};
|
||||
return sendCommand(data, sizeof(data));
|
||||
}
|
||||
|
||||
void printBasicInfo() //debug all data to uart
|
||||
{
|
||||
Serial.printf("Total voltage: %f\r\n", (float)packBasicInfo.Volts / 1000);
|
||||
Serial.printf("Amps: %f\r\n", (float)packBasicInfo.Amps / 1000);
|
||||
Serial.printf("CapacityRemainAh: %f\r\n", (float)packBasicInfo.CapacityRemainAh / 1000);
|
||||
Serial.printf("CapacityRemainPercent: %d\r\n", packBasicInfo.CapacityRemainPercent);
|
||||
Serial.printf("Temp1: %f\r\n", (float)packBasicInfo.Temp1 / 10);
|
||||
Serial.printf("Temp2: %f\r\n", (float)packBasicInfo.Temp2 / 10);
|
||||
Serial.printf("Balance Code Low: 0x%x\r\n", packBasicInfo.BalanceCodeLow);
|
||||
Serial.printf("Balance Code High: 0x%x\r\n", packBasicInfo.BalanceCodeHigh);
|
||||
Serial.printf("Mosfet Status: 0x%x\r\n", packBasicInfo.MosfetStatus);
|
||||
}
|
||||
|
||||
void printCellInfo() //debug all data to uart
|
||||
{
|
||||
Serial.printf("Number of cells: %u\r\n", packCellInfo.NumOfCells);
|
||||
for (byte i = 1; i <= packCellInfo.NumOfCells; i++)
|
||||
{
|
||||
Serial.printf("Cell no. %u", i);
|
||||
Serial.printf(" %f\r\n", (float)packCellInfo.CellVolt[i - 1] / 1000);
|
||||
}
|
||||
Serial.printf("Max cell volt: %f\r\n", (float)packCellInfo.CellMax / 1000);
|
||||
Serial.printf("Min cell volt: %f\r\n", (float)packCellInfo.CellMin / 1000);
|
||||
Serial.printf("Difference cell volt: %f\r\n", (float)packCellInfo.CellDiff / 1000);
|
||||
Serial.printf("Average cell volt: %f\r\n", (float)packCellInfo.CellAvg / 1000);
|
||||
Serial.println();
|
||||
}
|
||||
|
||||
void hexDump(const char *data, uint32_t dataSize) //debug function
|
||||
{
|
||||
Serial.println("HEX data:");
|
||||
|
||||
for (int i = 0; i < dataSize; i++)
|
||||
{
|
||||
Serial.printf("0x%x, ", data[i]);
|
||||
}
|
||||
Serial.println("");
|
||||
}
|
||||
|
||||
int16_t two_ints_into16(int highbyte, int lowbyte) // turns two bytes into a single long integer
|
||||
{
|
||||
int16_t result = (highbyte);
|
||||
result <<= 8; //Left shift 8 bits,
|
||||
result = (result | lowbyte); //OR operation, merge the two
|
||||
return result;
|
||||
}
|
||||
@ -1,66 +0,0 @@
|
||||
#include "BLEDevice.h"
|
||||
|
||||
void setup() {
|
||||
Serial.begin(115200);
|
||||
BLEDevice::init(""); // Initialize BLE device
|
||||
|
||||
BLEScan* pBLEScan = BLEDevice::getScan(); // Create new scan
|
||||
pBLEScan->setActiveScan(true); // Active scan uses more power, but get results faster
|
||||
BLEScanResults foundDevices = pBLEScan->start(30); // Scan for 30 seconds
|
||||
|
||||
Serial.println("Scanning completed");
|
||||
Serial.println("Devices found: " + String(foundDevices.getCount()));
|
||||
|
||||
for (int i = 0; i < foundDevices.getCount(); i++) {
|
||||
BLEAdvertisedDevice advertisedDevice = foundDevices.getDevice(i);
|
||||
Serial.println("\nFound Device: " + String(advertisedDevice.toString().c_str()));
|
||||
|
||||
// Now connect to the device and then discover its services and characteristics
|
||||
BLEClient* pClient = BLEDevice::createClient();
|
||||
Serial.println("Connecting to: " + String(advertisedDevice.getAddress().toString().c_str()));
|
||||
|
||||
if (pClient->connect(&advertisedDevice)) {
|
||||
Serial.println("Connected to device!");
|
||||
// Obtain references to all services
|
||||
std::map<std::string, BLERemoteService*>* pRemoteServices = pClient->getServices();
|
||||
for (auto &myService : *pRemoteServices) {
|
||||
Serial.println("Service: " + String(myService.first.c_str()));
|
||||
BLERemoteService* pRemoteService = myService.second;
|
||||
|
||||
// List all characteristics of this service
|
||||
std::map<std::string, BLERemoteCharacteristic*>* pChars = pRemoteService->getCharacteristics();
|
||||
for (auto &myChar : *pChars) {
|
||||
String properties = getCharacteristicProperties(myChar.second);
|
||||
Serial.print("\tCharacteristic: " + String(myChar.first.c_str()) + " | Properties: " + properties);
|
||||
|
||||
// Read descriptors of the characteristic
|
||||
std::map<std::string, BLERemoteDescriptor*>* pDescs = myChar.second->getDescriptors();
|
||||
for (auto &desc : *pDescs) {
|
||||
std::string descValue = desc.second->readValue();
|
||||
Serial.print(" | Descriptor: " + String(desc.first.c_str()) + " Value: " + String(descValue.c_str()));
|
||||
}
|
||||
|
||||
Serial.println();
|
||||
}
|
||||
}
|
||||
pClient->disconnect();
|
||||
} else {
|
||||
Serial.println("Failed to connect.");
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
String getCharacteristicProperties(BLERemoteCharacteristic* pChar) {
|
||||
String propDesc = "";
|
||||
if (pChar->canRead()) propDesc += "read ";
|
||||
if (pChar->canWrite()) propDesc += "write ";
|
||||
if (pChar->canWriteNoResponse()) propDesc += "write_no_resp ";
|
||||
if (pChar->canNotify()) propDesc += "notify ";
|
||||
if (pChar->canIndicate()) propDesc += "indicate ";
|
||||
propDesc.trim();
|
||||
return propDesc;
|
||||
}
|
||||
|
||||
void loop() {
|
||||
// Nothing to do here
|
||||
}
|
||||
Loading…
Reference in New Issue
Block a user